Mon, 25 May 2026 04:21:51 +0100 https://www.greenbuildingforum.co.uk/newforum/ Lussumo Vanilla 1.0.3 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18409 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18409 Fri, 27 Feb 2026 12:10:37 +0000 SteveZ
I have not active for a few years due to ill health. My mystery illness was diagnosed in 2022 as myeloma - definitely not nice. Although in partial remission thanks to the NHS, my DIY abilities and energies have been much reduced and I am beginning to clear out my garage.

I have an Evolution 255mm sIngle sliding mitre saw with its own Evolution stand and an extra roller stand. The items ar still on sale at Screwfix and with their latest discounts, come to £265. All the kit is in very good condition having been lightly used building a temporary shed store and bit of post and rail fencing.

The Evolution blade is the Rage multi-material one and happily cuts plastic, timber, plastic and steel. Surprised me too! I also have a suitable diamond cutting wheel - good for tiles or stone, in the garage somewhere which will be include if I can find it.

Offers around £130 would secure the set, or possibly break into individual items at half price. I am in North Cornwall, near Launceston.

Thanks for reading this - Next step is eBay]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18381 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18381 Fri, 05 Dec 2025 20:03:36 +0000 blubb
I am extending our MVHR system and I need an extra run of 125mm spiral air ducting. Does anyone in the Cambs area have any leftovers from their installation sitting quietly in the garage?

Any advice where to source it?

Many thanks!]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18328 Mon, 04 Aug 2025 12:39:30 +0100 Jeff B 2025
There was nothing wrong with the existing panels but it did not make economic sense (particularly labour cost) to remove all the existing panels/microinverters, then remount the old panels and rewire with DC cabling as new panels are so much cheaper now. So I now have a brand new system with new warranties which at my age should “see me out” as they say, hopefully until the end of the F.I.T. payments in 2031 at least!

Hence I have twenty one fully functioning 185W panels for sale. They were installed by an MCS registered company but I have no idea of their current value. Any ideas as to what I should be looking for?

Thanks.
Jeff]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18319 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18319 Thu, 17 Jul 2025 15:52:48 +0100 earth bau https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18124 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18124 Tue, 23 Apr 2024 22:09:01 +0100 yclairejenkins
I can send pics and try and find out the full model details if anyone is interested.

Also, if anyone can suggest where else might be a good place to find a buyer, that would be really helpful.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18082 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=18082 Mon, 05 Feb 2024 07:36:32 +0000 tvrulesme
Collection from Whitstable CT5 or London SE12.

Any offers considered]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17434 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17434 Fri, 01 Apr 2022 09:33:50 +0100 TimSmall
The SAP database entry for it is here:

https://www.ncm-pcdb.org.uk/sap/pcdbdetails.jsp?pid=34&id=500044&type=323&mid=020014

The new model (same casing, different controls I think) is here:

https://www.ventilationland.co.uk/product/27741/itho-daalderop-mvhr-hru-350-eco-unit-lr-rft-low-rise-350m-h.html

It turned out I couldn't quite squeeze it in because of a combination of my house's boiler positioning, and the fact that it turned out to be a different duct position variant than I thought I'd bought (what was on the listing and what was written on the box).

I've checked it over fully and it's in new condition (with factory packaging), and works correctly.

I suspect that the housing developer had bought the wrong duct port position version for their installs, tried to fit it, failed, then ordered another set of the correct install versions, and bunged the first lot back in the boxes for the second lot.

New sensible trade cost was about £900 inc VAT I think.

I've since made my own custom through-the-wall MVHR unit myself to fit in the tight space I had.

Located in Brighton, but happy for you to arrange courier collection (I suspect about £50 - bulky but light).

Open to offers.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17983 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17983 Tue, 03 Oct 2023 23:18:20 +0100 tony https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17959 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17959 Tue, 19 Sep 2023 10:20:37 +0100 TimSmall
Pro Clima DB+ - Intelligent airtight membrane made from paper.

Each roll: 50 metres * 1.35 metres.

non-plastic alternative to Pro Clima Intello etc.

£95 each (under half price).

Location: Brighton. Can be put on a courier at cost.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17865 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17865 Sat, 10 Jun 2023 22:50:41 +0100 Jeff B
Approx overall dimensions are: Ht: 1900 mm Diam: 550 mm.

I will upload a photo and a key to connections as separate files.

The store has three coils: a 12 metre finned coil, two concentric 6 metre finned coils (total length 12 metres) and one solar coil.

It was used in conjunction with a biomass (wood pellet) boiler and solar thermal panels and supplied (indirect) a conventional wet central heating system.

From new it was dosed with Fernox AF10 biocide to prevent microbiological growth. After decommissioning the store contents were tested for Legionella by a professional laboratory and no Legionella organisms were detected. A certificate for this is available.

Due to its size and weight the store would need to be collected by the intended purchaser. It does have the facility to attach a suitable hook to the floor of the F&E chamber for lifting purposes.

For sale: offers around £600.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17864 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17864 Sat, 10 Jun 2023 20:29:59 +0100 djh https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17861 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17861 Thu, 08 Jun 2023 20:30:48 +0100 tony
https://www.dropbox.com/s/wxloyxxv0d24139/IMG_4202.HEIC?dl=0

https://www.dropbox.com/s/z041enazu080ov6/IMG_4203.HEIC?dl=0

Free to collector - goes on free cycle next weekend]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17611 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17611 Mon, 17 Oct 2022 21:05:20 +0100 David Lam Sadly the cost for delivery of wood fibre is insane! I only need a little bit and it's £70 just for getting it here.
Does anybody in the area have any? Happy to pay the original price if it's just a reasonable drive away.
Thanks!

David]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17583 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17583 Tue, 27 Sep 2022 20:00:12 +0100 SChoules Cheers,
Sue]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17568 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17568 Thu, 15 Sep 2022 18:51:00 +0100 daveking66
I need about 100ml to complete the wall I’m priming.

Thanks]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17556 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17556 Fri, 02 Sep 2022 20:19:02 +0100 SimonD
Available free to a new home.

Can be collected from near Bath.

http://www.thermoflocinsulation.co.uk/cellulose-based-insulation-loose-fill-insulation/]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17550 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17550 Fri, 26 Aug 2022 12:00:43 +0100 dereke Dimensions are 1200x400x200.
I mostly just want to get rid of it so open to offers.
I am in Stroud and you would have to collect it but you are welcome to split the pallet open and take them in batches if need be.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17539 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17539 Fri, 12 Aug 2022 20:39:00 +0100 daveking66 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17409 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17409 Mon, 07 Mar 2022 13:45:58 +0000 mr_magicfingers
Dunsley Yorkshire Multifuel Boiler Stove, with external air kit.
Newark/Enerstore multifuel 300l thermal store.

The stove is amazing, has it's own adjustable thermostat so its fire up and forget, other than for loading logs. It's very clean burning, our chimney sweep always commented on how little dirt there was when they swept it.

The thermal store has two 3kw high temperature immersion heaters, tappings for hot water and radiator circuit along with coils for a heat pump and woodburning stove . There are three additional thermometer pockets so you can see the temperatures at the top, middle and bottom of the store.

Collection only from near Barnstaple, North Devon. The stove is extremely heavy but is on a pallet and I have the ability to load it onto a trailer etc. This system has worked like a charm providing 100% of our hot water along with our solar PV and diverter for the past 7 years and a major chunk of our home heating.

£2000 for both or £1700 for the stove and £500 for the store.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17445 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17445 Tue, 12 Apr 2022 19:45:40 +0100 Pingy
Open to offers.

I live in South Leicestershire.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17444 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17444 Tue, 12 Apr 2022 19:40:14 +0100 Pingy https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17443 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17443 Tue, 12 Apr 2022 19:30:31 +0100 Pingy
I live in south Leicestershire.

Open to offers.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17422 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17422 Wed, 16 Mar 2022 17:23:13 +0000 chippyclaus New price £274, selling for £150 on collection or postage added.
Please email, if interested - info@smart-energy-services.co.uk]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17367 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17367 Sat, 22 Jan 2022 22:29:34 +0000 luz13827
3m2 10mm Foiled Spaceloft Roll - bought for £165.00. Available for £120 or nearest offer, and collection from West London.

We used Spacetherm strips in our project, but have an unused roll of the Spaceloft blanket roll that we did not use. I am unsure the exact width/length of the roll, but in total it was specified to cover an area of 3m2. It can be cut to size to suit. Still in packaging.

If interested, please message.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17339 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17339 Fri, 31 Dec 2021 10:59:01 +0000 luz13827
We are likely to have some excess 100mm and possibly 140mm SteicoFlex Wood Fibre insulation available in the next 2-3 weeks. I am not sure of quantity yet, but will know in a couple of weeks once final insulation is installed on our project.

Available at a discounted price and available for pickup from West London. Please let me know if interested and I can keep you updated.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17178 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17178 Thu, 02 Sep 2021 18:29:33 +0100 casero
I also have a half sheet of aerogel board (120cm by 105cm) and approx 180 Timco M8 x 90mm plastic insulation fixings left over. Again, free to anyone who can make use of them]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16915 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16915 Sat, 30 Jan 2021 20:31:34 +0000 ChrisinYorkshire
https://baumit.co.uk/products/internal-plasters/fine-plasters-1/klima-glatt-w]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17169 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17169 Wed, 25 Aug 2021 21:07:45 +0100 petebryden https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17171 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17171 Wed, 25 Aug 2021 22:48:29 +0100 Jeff B
Also: Poujoulet 150mm, insulated, twin wall, stainless steel flue comprising:
3 x 1m sections
2 x 90 degree tee's
1 x draught stabiliser
1 x stop end
1 x roof flashing
1 x rain cowl
Various s/s support brackets

No reasonable offers refused! Buyer would have collect though.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17170 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17170 Wed, 25 Aug 2021 21:11:00 +0100 petebryden https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17074 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17074 Fri, 28 May 2021 22:01:39 +0100 dereke
I don't think it will be worth much money so happy for it to go to someone who needs to keep plodding along with oil until they can get a heat pump. Might just ask for a donation to charity.

I'll try and attach some pictures.

edit: It is in Stroud]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17104 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17104 Mon, 28 Jun 2021 18:24:48 +0100 owlman Whisper me if you're interested and I'll measure up how many linear metres etc..
I'm in N. Yorkshire.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17098 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17098 Sun, 20 Jun 2021 12:32:16 +0100 Jeff B Capacity: 3.3 Tonnes
Volume: 5 Cubic Metres
Suitable for 45° auger and vacuum discharge

Manual Discharge for bucket filling
Anti-static system
Internal pipe system with baffle
Twin camlocks and filter sock
Sight glass

Waterproof and condensation free, ideal external storage solution for wood pellets or other pelletised materials e.g. animal feedstuffs.

No reasonable offer refused. FYI: Cost new: £1950. Buyer to collect]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17093 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17093 Mon, 14 Jun 2021 10:28:35 +0100 GBP-Keith
Solar hot water, passive solar south facing clerestory, amazing views, 1 acre of lawns (ideal for gshp in future) then please look up ’ Sunfold’ at my agent john Francis, Cardigan. I can PM or upload pics if required.

Cheers, Keith. Always happy to answer any questions and I do all the viewings. West Wales is a fabulous place to live.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16407 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16407 Mon, 20 Jan 2020 20:11:17 +0000 Petlyn
We are in North Norfolk for collection.

Message me if you are interested.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17048 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17048 Sun, 02 May 2021 13:29:29 +0100 jms452
http://smarthomeenergy.co.uk/wattson-optiplug

You don't seem to be able to get them for love nor money!]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17042 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17042 Wed, 28 Apr 2021 14:21:19 +0100 Graham S
Cheers,

Graham]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17033 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17033 Thu, 22 Apr 2021 22:40:21 +0100 Jeff B https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17018 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17018 Tue, 13 Apr 2021 19:04:47 +0100 Nick Parsons
(https://safeguardstore.co.uk/oldroyd-xv-black-cavity-drainage-membrane/),

sundry fixings and butyl tapes (single and double-sided) and several lengths of 2m aquadrain channel and several 90-degree bends.

Open to offers.

I'm in Sheffield, S. Yorks.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17014 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=17014 Sat, 10 Apr 2021 00:15:08 +0100 tony
15@1.55
12@2.3 600x240x10mm
Heavy duty sheet piles

Scrap value is 4 figures - talk to me if interested]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=15957 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=15957 Mon, 24 Dec 2018 09:49:07 +0000 Petlyn
Expanded glass bead aggregate for loose-fill insulation, limecrete and all types of floor screed - the non-combustible, green, permanent alternative to polystyrene (EPS) and polyurethane.

Proof against all rodents/insects etc. Expanded recycled glass beads 4-8mm in size, free-flowing loose-fill, pouring or blowing, even into awkward spaces, lightweight, non-absorbent. Ideal for filling voids under floor, around cable ducts etc or as an aggregate for insulated floor screeds. Suitable for use under suspended wooden floors above a DPC in Victorian buildings etc, livestock buildings and other insulated concrete floors.

High strength, high sound insulation performance, thermal conductivity W/(m-k) 0.066, environmentally friendly material. Insulation value does not degrade over time (10 years) or decay.

Identical to products such as Geocell, Poraver, Nebulight etc., similar to Leca and Lytag but with somewhat higher insulation performance.

In 'big bags' - capacity min 0.5 m3 per bag (100kgs per bag), 30 cubic metres available. Blower also available by separate negotiation.

Looking for £100/bag or make me an offer for quantities.

Forklift loading available or delivery possible, 2 - 10 bags per delivery. Please message with postcode for costs]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=15772 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=15772 Tue, 19 Jun 2018 19:32:17 +0100 aiazas Has anyone got this size of offcut lying about and cluttering up their shed/workshop?
Please do get in touch and let me know your price. Many thanks. Aiora]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16730 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16730 Thu, 24 Sep 2020 20:24:22 +0100 goodevans
Bulb have just emailed me to let me know that they are putting up my electricity to 16.011ppu (from 14.255ppu) - I thought therefore that this increase is sufficient for me to experiment with the Octopus Agile Tariff.

As you are all friends here - I'm guessing one of you will be a Octopus customer and so I invite one of you to whisper me a referral code for Octopus please (so we can both benefit). Only regular existing contributors to this forum will be considered.]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16873 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16873 Sun, 03 Jan 2021 15:09:29 +0000 cc64
7 Rationel formaplus alu clad triple glazed side hung casement windows will become available this month.

Finished in RAL 9016 TRAFFIC white inside and out ; groove for window board in cill; grooves for window reveal board on jambs and header, TGU st. Gobain planitherm XN, planiclear, planitherm XN 4-20-4-20-4 warm edge spacers voids purged 90argon 10% air. U~ 0.5
All bar the narrow one with central mullion against which flanking side hung casement open/close.

Sizes (w * h, mm)
883 * 1168
903*1178
883*1168 with privacy glass Cotswold centre pane; trickle vent
453*1178
888*1178
893*1178
1313*1168

Location mid Herts.
Only partially used; installed since October.
Rejected on basis of incorrect dimensioning.
No quality issues - lovely windows.

Availability TBD this month when their correctly dimensioned replacements are installed.

No fee but collector will be invited to make a donation to the Royal Hospital for Neurodisability Putney; with their agreement
I will publicise their generosity here. Unless they are
ungenerous in which case I'll do that without their agreement.

Note these windows are heavy. Min 24kg, most 42kg, max 63kg. Frame depth 116mm+7mm alu cladding.


Matthew

:shocked:]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16872 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16872 Sun, 03 Jan 2021 14:38:39 +0000 cc64
Acquired without the insulation; available free in
same state. This is not as mad as it sounds; the cavities
were variable width so I could accommodate all
by cutting insulation lengths of appropriate width from a 30mm sheet of kooltherm.

5 x 2.4m
4 x 1.1m offcuts
1 x 1.4m offcut
No joiners; but these easily made on a table saw.

Location mid Herts

Available sans charge but whomever comes and
Collects will be invited to make a donation to
The Royal Hospital for Neurodisability Putney


Matthew]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=12010 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=12010 Tue, 22 Apr 2014 16:58:34 +0100 archess200 Also metal cladding on walls installed over insulation and timber battens, 220 sq.m. Same problem finding installers.
On site August/September.
Anybody interested?]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16760 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16760 Sun, 18 Oct 2020 16:42:59 +0100 jamesingram Just notice these on FB market place
2nd hand thinfilmed panel, 11000 of them
10p per W !
https://www.facebook.com/marketplace/item/2800409486854855/

thought it might be of interest to someone]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16750 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16750 Sat, 10 Oct 2020 16:36:52 +0100 jamesingram ive got 2 sets of 47mm evac tubes about somewhere too (new)

https://www.ebay.co.uk/itm/333742989556]]> https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16702 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16702 Thu, 03 Sep 2020 18:46:27 +0100 owlman https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16612 https://www.greenbuildingforum.co.uk/newforum/comments.php?DiscussionID=16612 Wed, 17 Jun 2020 13:46:12 +0100 drunkenrockmonkey Been used on my own house for 140m2 of insulation.
Come with head held hot knife and spare wires.

Looking for £200 plus postage
Can send photos of the item

This is the model here
https://www.probauteam.com/en/polystyrene-cutter-easycutter/

Many Thanks
Kevin]]>